PRIMER COAT SCG 360
SKU:
$0.00
per item
DESCRIPTION
Primer coat SCG 360 is a cold applied, general purpose roofing primer formulated with highly pliable, flexible bitumen, water based and compounded with wetting and saturation additives.
USES
Primer coat SCG 360 is suitable for concrete,smooth asphalt roofs, brick and metal surfaces, used as the prime coat prior to installation of any bitumat membrane.
Select solvent allows for optimum penetration of Bitumat concrete primer into the surface pores, pinhole sand cracks.
Absorbs the existing dust and scale thus the resulting surface permits the proper bonding of self-adhesive as well as torchable membranes, in addition to any other bituminous adhesives and coatings.
APPLICATION
The surface must be thoroughly cleaned, and all dust, dirt, loose coatings, oil or greasy substances removed. Concrete must be completely cured and dried prior to priming.
Primer coat SCG 360 should be allowed to dry before application of subsequent coat / membrane. It can be applied with a roofing brush, broom stick of short, squeegee and at the recommended coverage rate.
Primer coat SCG 360 is a cold applied, general purpose roofing primer formulated with highly pliable, flexible bitumen, water based and compounded with wetting and saturation additives.
USES
Primer coat SCG 360 is suitable for concrete,smooth asphalt roofs, brick and metal surfaces, used as the prime coat prior to installation of any bitumat membrane.
Select solvent allows for optimum penetration of Bitumat concrete primer into the surface pores, pinhole sand cracks.
Absorbs the existing dust and scale thus the resulting surface permits the proper bonding of self-adhesive as well as torchable membranes, in addition to any other bituminous adhesives and coatings.
APPLICATION
The surface must be thoroughly cleaned, and all dust, dirt, loose coatings, oil or greasy substances removed. Concrete must be completely cured and dried prior to priming.
Primer coat SCG 360 should be allowed to dry before application of subsequent coat / membrane. It can be applied with a roofing brush, broom stick of short, squeegee and at the recommended coverage rate.